Home About Us Services Network Media Release   Contact Us Careers
 
Home>Services>Cooling Solutions>CASE FRP Cooling Towers
   
                        
   
CASE ANNUAL CONFERENCE 2010

CASE held its Annual Conference at Sariska Palace, Alwar(Rajasthan) from 28th to 31st of March2010.
              
   
                                         Cooling Solutions
  
CASE FRP Cooling Towers

Features
  • Light weight enables them to be installed on roof tops.

  • Compact design account for better space management.

  • Aesthetic look adds to the site face lift.

  • Design to withstand high velocities up to 200 km/hr and natural shocks.

  • FRP panels of 5mm thickness for better product life.

  • Isothelic resin used for stronger bonding & acid resistance.

  • Gel coat used for prevention of UV rays, thus preventing algae formation/ microbiological growth.

  • Standard motor used (ABB/Crompton/Kirloskar/GE)

  • Motor specification - 415v ±10%, 50 Hz ±5%, Squirrel cage, 3 phase, IP 55 Protection, 720/960 rpm, induction motor.

  • Noise level of below 60 db on octane band.

  • FRP/Aluminum fan blades and hub that are statically and dynamically balanced resulting in zero vibrations.

  • Static/ Dynamic UPVC water distribution network with perforated branch pipes.

  • PVC Fills of 0.3mm thickness capable to handle hard water with an option of HDPE round ball fills for dirty water and high temperature applications.

  • Fills sheet size -24"x12"x6".

  • Fill support materials is stainless steel.

  • Drift eliminator made of rigid PVC/FRP.

  • Basin made of FRP

  • Nut bolt-Stainless Steel
  • CASE RD Series
    		•
  • CASE RT Series
    		•

    BACK

    		  
    Home | About Us | Services | Network | Media Release | Corporate Catalogue | Contact Us | Careers | | |
    ©CASEPL 2010. All rights reserved.